Aircraft oxygen systems fail in two broad ways: the cylinder loses its strength and ruptures, or something in the valve, regulator or tubing ignites in oxygen and burns. The second is more common than people expect, and it leaves different evidence. An investigation has to cover both, and the cylinder's paperwork as well, because an aircraft oxygen cylinder answers to the FAA for its installation and to the DOT for the cylinder itself, as our article on aviation oxygen cylinder regulations explains.
1. Was it a rupture or an oxygen fire?
Burn patterns, melted or consumed metal and soot inside a valve or regulator point to ignition in oxygen. A clean fracture of the cylinder wall points to a mechanical rupture. ASTM G88 describes how oxygen systems are designed to avoid ignition, including mechanisms such as rapid pressurization and particle impact, and gives investigators a checklist of where to look.
2. Cleanliness and materials
Hydrocarbon contamination, the wrong lubricant or an incompatible seal material can turn a routine valve opening into a fire. Investigators ask how the components were cleaned and to what standard, such as CGA G-4.1, ASTM G93 or Federal Specification RR-C-901, whether residual contamination was tested, and whether the materials were suitable for oxygen under ASTM G94 and ISO 11114.
3. The cylinder's markings and records
The cylinder's DOT specification or special permit, its manufacturing date, its requalification marks and the records of the facility that last tested it set the baseline. A cylinder used past its permitted life, or returned to service without proper requalification, cleaning and drying, changes the analysis.
4. The installation on the aircraft
FAA rules for transport category aircraft, 14 CFR 25.1441 to 25.1453, cover oxygen equipment and its protection, including protection of oxygen equipment from rupture. Mounting, routing, protection from heat and impact, and any recent maintenance or modification all belong in the investigation.
5. Maintenance and overhaul history
Overhaul records for the valve and regulator, parts and lubricants used, and who performed the work often explain how contamination or an incompatible part got into the system. Preserve those records with the hardware, and keep components sealed and uncleaned until all parties agree how to examine them.
Investigating a cylinder failure?
Contact us before any destructive examination or testing. We can help agree an inspection protocol, preserve the evidence and scope the failure analysis.
This is general technical guidance, not legal advice. Every matter depends on its own facts and evidence.